Pulse Distribution Amplifier
1 Equipment Image
1) Supports two input signals with seamless manual or automatic switching
2) Provides multiple high-quality pulse outputs
3) Adjusts output signal phase
4) Indicates operating status and controls input switching through the front panel
5) Reports operating status and alarms every second through the communication interface and receives control commands, enabling real-time reporting and monitoring of equipment status and measurement data
|
Parameter |
Standard Configuration |
Optional Configuration |
|
Input Signal Type |
1PPS pulse signal |
Other pulse signals |
|
Number of Input Channels |
2 channels |
1 channel |
|
Input Signal Amplitude |
≥2.4 V (TTL level) |
- |
|
Parameter |
Standard Configuration |
Optional Configuration |
|
Signal Type |
Same as the input signal | |
|
Number of Channels |
16 channels |
Customizable; total not exceeding 16 channels |
|
Signal Amplitude |
≥3 V (TTL level, at the end of a 100 m coaxial cable) | |
|
Output Impedance |
Can drive a 50 Ω load | |
|
Leading-Edge Jitter |
≤100 ps |
≤50 ps |
|
Leading-Edge Width |
≤10 ns (at the end of a 100 m coaxial cable) | |
|
Pulse Width |
Same as the input signal | |
|
Parameter |
Standard Configuration |
Optional Configuration |
|
Output phase consistency before and after input switching |
≤1 ns |
≤300 ps |
|
Output signal phase consistency |
- |
≤300 ps |
|
Output signal phase adjustment resolution |
125 ps |
10 ps |
|
Output signal phase adjustment range |
± 10 ns |
± 5 ns |
附件下载：
